Jump to content

Zomboid Change Sandbox Settings ingame?


Majestic

Recommended Posts

Hello, is there a way or Mod for Zomboid with i can change Ingame the Sandbox settings & zombie population "without starting a New Game"?

 

Because it's very, very annoying to start everytime a whole New Game after i have already built a Base and then notice i set the settings wrong, or the Zombies are to less, or the difficulty is way to easy etc.

 

Best Regards   :)

Link to comment
Share on other sites

 

Hello, is there a way or Mod for Zomboid with i can change Ingame the Sandbox settings & zombie population "without starting a New Game"?
 
Because it's very, very annoying to start everytime a whole New Game after i have already built a Base and then notice i set the settings wrong, or the Zombies are to less, or the difficulty is way to easy etc.
 
Best Regards   :)

 

 

try these two files:

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>erosion

 

and

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>zombies

 

(However that last file is super hard to use since its a big block of text, making it hard to understand which values to change. I reorganized it here if you want to use an easier to use format instead, or at least to reference which values to change.)

 

I don't think you can change things like time of day, loot rarity, xp bonus, etc. But you should be able to adjust the erosion and zombie settings...I think...

Link to comment
Share on other sites

 

try these two files:

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>erosion

 

and

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>zombies

 

 

 

If i go on zombies folder as you said

i become this.

 

# Same as the sandbox "Zombie Count" setting.
# 4.0 = Insane, 2.0 = High, 1.0 = Normal, 0.35 = Low, 0.0 = None.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationMultiplier=2.0
 
# Adjusts the desired population at the start of the game.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationStartMultiplier=1.0
 
# Adjusts the desired population on the peak day.
# Minimum=0.0 Maximum=4.0 Default=1.5
PopulationPeakMultiplier=1.5
 
# The day when the population reaches it's peak.
# Minimum=1 Maximum=365 Default=28
PopulationPeakDay=28
 
# The number of hours that must pass before zombies may respawn in a cell.
# If zero, spawning is disabled.
# Minimum=0.0 Maximum=8760.0 Default=72.0
RespawnHours=72.0
 
# The number of hours that a chunk must be unseen before zombies may respawn in it.
# Minimum=0.0 Maximum=8760.0 Default=16.0
RespawnUnseenHours=16.0
 
# The fraction of a cell's desired population that may respawn every RespawnHours.
# Minimum=0.0 Maximum=1.0 Default=0.1
RespawnMultiplier=0.1
 
# The number of hours that must pass before zombies migrate to empty parts of the same cell.
# Minimum=0.0 Maximum=8760.0 Default=12.0
RedistributeHours=12.0
 
# The distance a virtual zombie will try to walk towards the last sound it heard.
# Minimum=10 Maximum=1000 Default=100
FollowSoundDistance=100
 
# The size of groups real zombies form when idle. Zero means zombies don't form groups.
# Groups don't form inside buildings or forest zones.
# Minimum=0 Maximum=1000 Default=20
RallyGroupSize=20
 
# The distance real zombies travel to form groups when idle.
# Minimum=5 Maximum=50 Default=20
RallyTravelDistance=20
 
# The distance between zombie groups.
# Minimum=5 Maximum=25 Default=15
RallyGroupSeparation=15
 
# How close members of a group stay to the group's leader.
# Minimum=1 Maximum=10 Default=3
RallyGroupRadius=3
 
And as you can see i could change nothing here for my game.
Link to comment
Share on other sites

 

 

try these two files:

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>erosion

 

and

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>zombies

 

 

 

If i go on zombies folder as you said

i become this.

 

# Same as the sandbox "Zombie Count" setting.
# 4.0 = Insane, 2.0 = High, 1.0 = Normal, 0.35 = Low, 0.0 = None.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationMultiplier=2.0
 
# Adjusts the desired population at the start of the game.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationStartMultiplier=1.0
 
# Adjusts the desired population on the peak day.
# Minimum=0.0 Maximum=4.0 Default=1.5
PopulationPeakMultiplier=1.5
 
# The day when the population reaches it's peak.
# Minimum=1 Maximum=365 Default=28
PopulationPeakDay=28
 
# The number of hours that must pass before zombies may respawn in a cell.
# If zero, spawning is disabled.
# Minimum=0.0 Maximum=8760.0 Default=72.0
RespawnHours=72.0
 
# The number of hours that a chunk must be unseen before zombies may respawn in it.
# Minimum=0.0 Maximum=8760.0 Default=16.0
RespawnUnseenHours=16.0
 
# The fraction of a cell's desired population that may respawn every RespawnHours.
# Minimum=0.0 Maximum=1.0 Default=0.1
RespawnMultiplier=0.1
 
# The number of hours that must pass before zombies migrate to empty parts of the same cell.
# Minimum=0.0 Maximum=8760.0 Default=12.0
RedistributeHours=12.0
 
# The distance a virtual zombie will try to walk towards the last sound it heard.
# Minimum=10 Maximum=1000 Default=100
FollowSoundDistance=100
 
# The size of groups real zombies form when idle. Zero means zombies don't form groups.
# Groups don't form inside buildings or forest zones.
# Minimum=0 Maximum=1000 Default=20
RallyGroupSize=20
 
# The distance real zombies travel to form groups when idle.
# Minimum=5 Maximum=50 Default=20
RallyTravelDistance=20
 
# The distance between zombie groups.
# Minimum=5 Maximum=25 Default=15
RallyGroupSeparation=15
 
# How close members of a group stay to the group's leader.
# Minimum=1 Maximum=10 Default=3
RallyGroupRadius=3
 
And as you can see i could change nothing here for my game.

 

 

What couldn't you change?

 

If for instance you want to lower the zombie population just change:

 

Population Multiplayer = 2

 

to

 

Population Multiplayer = 1

 

vice versa if you want to raise it.

Link to comment
Share on other sites

 

 

 

try these two files:

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>erosion

 

and

 

C:>Users>(Username)>Zomboid>Saves>Sandbox>(Character Folder of Your Choice)>zombies

 

 

 

If i go on zombies folder as you said

i become this.

 

# Same as the sandbox "Zombie Count" setting.
# 4.0 = Insane, 2.0 = High, 1.0 = Normal, 0.35 = Low, 0.0 = None.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationMultiplier=2.0
 
# Adjusts the desired population at the start of the game.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationStartMultiplier=1.0
 
# Adjusts the desired population on the peak day.
# Minimum=0.0 Maximum=4.0 Default=1.5
PopulationPeakMultiplier=1.5
 
# The day when the population reaches it's peak.
# Minimum=1 Maximum=365 Default=28
PopulationPeakDay=28
 
# The number of hours that must pass before zombies may respawn in a cell.
# If zero, spawning is disabled.
# Minimum=0.0 Maximum=8760.0 Default=72.0
RespawnHours=72.0
 
# The number of hours that a chunk must be unseen before zombies may respawn in it.
# Minimum=0.0 Maximum=8760.0 Default=16.0
RespawnUnseenHours=16.0
 
# The fraction of a cell's desired population that may respawn every RespawnHours.
# Minimum=0.0 Maximum=1.0 Default=0.1
RespawnMultiplier=0.1
 
# The number of hours that must pass before zombies migrate to empty parts of the same cell.
# Minimum=0.0 Maximum=8760.0 Default=12.0
RedistributeHours=12.0
 
# The distance a virtual zombie will try to walk towards the last sound it heard.
# Minimum=10 Maximum=1000 Default=100
FollowSoundDistance=100
 
# The size of groups real zombies form when idle. Zero means zombies don't form groups.
# Groups don't form inside buildings or forest zones.
# Minimum=0 Maximum=1000 Default=20
RallyGroupSize=20
 
# The distance real zombies travel to form groups when idle.
# Minimum=5 Maximum=50 Default=20
RallyTravelDistance=20
 
# The distance between zombie groups.
# Minimum=5 Maximum=25 Default=15
RallyGroupSeparation=15
 
# How close members of a group stay to the group's leader.
# Minimum=1 Maximum=10 Default=3
RallyGroupRadius=3
 
And as you can see i could change nothing here for my game.

 

 

What couldn't you change?

 

If for instance you want to lower the zombie population just change:

 

Population Multiplayer = 2

 

to

 

Population Multiplayer = 1

 

vice versa if you want to raise it.

 

Ok but i changed before i start a New Game my Zombie population on 3.0
So why is the Zombie Population setting in the Folder 2.0 and not 3.0 etc.?
 
I think that's the default Settings who i can't change for the Game.
Link to comment
Share on other sites

 

 

 

# Same as the sandbox "Zombie Count" setting.
# 4.0 = Insane, 2.0 = High, 1.0 = Normal, 0.35 = Low, 0.0 = None.
# Minimum=0.0 Maximum=4.0 Default=1.0
PopulationMultiplier=2.0
 
Ok but i changed before i start a New Game my Zombie population on 3.0
So why is the Zombie Population setting in the Folder 2.0 and not 3.0 etc.?
 
I think that's the default Settings who i can't change for the Game.

 

 

Could be that there is no 3.0 option for the zombie population? I am not entirely sure that you can enter any variable you want for certain settings.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...