DreyMIX

Ho sostituito il precedente server con uno nuovo da 64 slot e direttamente hostato in italia (quello precedente si trovava in francia). Buon divertimento

Hello, there is an option to set on the server to view the connected users and options from the site?

Salve, metto a disposizione un server italiano di Zomboid. Il nuovo server si trova in Italia (e non più in francia come quello precedente). Sito di riferimento: www.gravplanetitalia.net Nel browser interno del gioco lo trovate come [iT] GravPlanetItalia.net Indirizzo IP: 95.141.36.204 Porta: 16261 Banner Stato Server Vi consiglio prima di unirvi al server di specificare anche una password. Se l'username non esiste, verrà creato automaticamente insieme alla password che avete scelto. Questo vi permette di non farvi fregare il nickname, qual'ora qualcuno tenti di entrare nel server con il vostro username. Il server è stato configurato come Sandbox. In questo modo è possibile personalizzare una serie di opzioni. Ecco la configurazione attuale: Opzioni generali PVP: AttivatoServer in pausa quando è vuoto: NoOggetti iniziali: Mattarello, Giornale e 3 MeleSandbox - Opzioni del Mondo Quantità Zombie: AltaDistribuzione Zombie: Centro urbanoTubature d'acqua: Fino a 60 giorniElettricità: Fino a 50 giorniFrequenza degli allarmi nelle case: Molto SpessoFrequenza delle case bloccate (Porta): Molto spessoDeterioramento degli alimenti: NormaleRespawn degli oggetti: Ogni settimanaRespawn degli zombie: Ogni settimanaMesi passati dall'apocalisse: 0Sandbox - Natura Temperatura: NormalePioggia: NormaleVelocità di erosione: Normale (100 giorni)Velocità di coltivazione: NormaleAbbondanza della natura: NormaleSandbox - Rarità degli oggetti Cibo: RaroArmi: RaroAltri oggetti: RaroSandbox - Personaggio Esperienza: 1.2xIncremento stats: NormaleSandbox - Opzioni del tempo Durata di un giorno: 2 ore (reali)Mese di inizio: LuglioOra di inizio: 7 di mattinaSandbox - Zombie Velocità: Shamblers (normali penso)Forza: DeboliResistenza: NormaleTipo di trasmissione: Sangue + SalivaMortalità dell'infezione: 1-2 settimaneTempo di rianimazione: 2-3 giorniCognizione: Navigazione di baseMemoria: CortaRaggio di visione: NormaleUdito: NormaleOdore: NormaleNB: i tempi si riferiscono a quelli del gioco.

Here is the answer from Kimsufi Dear Sir / Madam,I check that forum page, which you sent me and problem looks solved already.It there would be any traffic on your server taken as a ddos attack, you will be noticed about it.If there is anything else please do not hesitate to contact us.Kind Regards,JanCustomer Support

I tried to set PauseEmpty as "false" and now the server is also published with 0 players! So the problem is if the setting is set to "true". The fact is that now by setting the option to "false", when no player is connected, the days continue (but I wanted to avoid this thing). Edit: Than before now with the option set to "false" the server also appears when there are 0 players. But occasionally disappears from the list, and then reappeared.

The server is OVH, but I bought it on kimsufi (http://www.kimsufi.com/it/). I tried to submit a ticket directly from the manager, but I still do not have responded! From their website I can not find a form or something similar to contact them. Do you think I can hear directly OVH for this problem? I'll try to put it to "false". Thank You.

Yes, PauseEmpty is set to true could be a problem?

Hello? How come my server appears in the list only when there is at least one player connected? I saw other servers with 0 players connected yet they continue to be in the list.

Yesterday I noticed that the server was listed as a public server (I was also connected in the server). The support still did not answer in any case. But then it's working? I have not touched anything.

While waiting for a response from the support, I saw that the IP address with which it communicates with the server is "162.159.255.217", correct? Is there any linux command to control traffic on that IP and see if the server is blocking or not? PS: Why repeat: the server is now working well and worked well before (I even upgraded to centos 6.6). There remains only the mystery because it can not be inserted in the list of public servers. With older versions of Project Zomboid, the server was properly registered to the list of public servers. So, either you have changed something, or have changed something those of OVH: D

ok thx! I will keep you updated.

I can try to feel OVH, but the thing is strange because in previous versions of the server, it worked. What should I tell them exactly?

If I connect via direct IP works. But long ago with version 29, the server was published online! What has changed since then? It may be that he does not like something in the name of the server?

Yes, Centos 6.5. But I had already solved long ago: http://theindiestone.com/forums/index.php/topic/6604-error-server-centos/?p=153770

Sorry, how do I do this? Is there a command to be run on centos to control this thing?

The firewall is off on my linux machine :\

ok, I tried to restart the server. The last lines ALARMS: 55/1008 buildings have alarmsMAX #ZONES is 7RakNet.Startup() return code: 0 (0 means success)*** SERVER STARTED ****server is listening on port 16261connecting to public server listUser DreyMIX is trying to connect.Connected new client DreyMIX ID # 0 and assigned DL port 16262testing TCP download port 16262client connected to TCP download port 16262 okloaded chunks for cell 161,98 ms=226.24084loaded chunks for cell 162,98 ms=103.04648loaded chunks for cell 161,99 ms=74.86488loaded chunks for cell 162,99 ms=96.49038loaded chunks for cell 161,100 ms=175.46815loaded chunks for cell 162,100 ms=155.5414RecalcAll for cell 161,98 ms=1278.3157RecalcAll for cell 162,98 ms=615.6201RecalcAll for cell 161,99 ms=254.24777RecalcAll for cell 162,99 ms=239.01971RecalcAll for cell 161,100 ms=250.08893RecalcAll for cell 162,100 ms=251.22284loaded2=[]finish loading cell 161,98 ms=2031.3474loaded2=[zombie.network.ServerMap$ServerCell@5de702a, zombie.network.ServerMap$ServerCell@4e95d868, zombie.network.ServerMap$ServerCell@4fb2bc26, zombie.network.ServerMap$ServerCell@5f5e8baa]finish loading cell 162,98 ms=356.82974loaded2=[zombie.network.ServerMap$ServerCell@4e95d868, zombie.network.ServerMap$ServerCell@4fb2bc26, zombie.network.ServerMap$ServerCell@5f5e8baa]finish loading cell 161,99 ms=335.71606loaded2=[zombie.network.ServerMap$ServerCell@4fb2bc26, zombie.network.ServerMap$ServerCell@5f5e8baa]finish loading cell 162,99 ms=317.82648loaded2=[zombie.network.ServerMap$ServerCell@5f5e8baa]finish loading cell 161,100 ms=314.09982loaded2=[]finish loading cell 162,100 ms=302.61136loaded chunks for cell 163,98 ms=76.11794loaded chunks for cell 163,99 ms=55.82305loaded chunks for cell 163,100 ms=59.65005RecalcAll for cell 163,98 ms=398.36664RecalcAll for cell 163,99 ms=480.746loaded2=[]finish loading cell 163,98 ms=566.93945RecalcAll for cell 163,100 ms=244.68777loaded2=[]finish loading cell 163,99 ms=321.47116loaded2=[]finish loading cell 163,100 ms=307.62192

Hi, the IP is: 91.121.157.24 I am inside the server from a couple of hours. Thx! Edit: Last log from server: loaded2=[]finish loading cell 161,98 ms=692.1416loaded2=[zombie.network.ServerMap$ServerCell@154b2e10]finish loading cell 161,99 ms=638.3294loaded2=[]finish loading cell 161,100 ms=612.9365connecting to public server listconnecting to public server list

Hello, the server is open for more than two hours and is set as public. Except that in the list of public servers still does not appear, why? My config: nightlengthmodifier=1.0PVP=falsePauseEmpty=trueGlobalChat=trueOpen=trueServerWelcomeMessage= <RGB:1,1,1> Benvenuto su GravPlanetItalia.net! <LINE> Visita il nostro sito: www.gravplanetitalia.net <LINE> Per la chat premi "t", per la chat globale premi "y". <LINE> LogLocalChat=trueAutoCreateUserInWhiteList=trueDisplayUserName=trueSpawnPoint=0,0,0SafetySystem=falseShowSafety=falseSafetyToggleTimer=100SafetyCooldownTimer=120SpawnItems=Base.KitchenKnife,Base.Apple,Base.Apple,Base.Apple,Base.NewspaperDefaultPort=16261ResetID=850089616Mods=Map=Muldraugh, KYSpawnRegions=servertest_spawnregions.luaDoLuaChecksum=truePublic=truePublicName="[IT] GravPlanetItalia.net | Project GRAVoid #Coop/PvE"PublicDescription="Esp 1.2(normale), Respawn: Oggetti(sett)/Zombie(mens), Apocalypse(2mesi), Clima(norm), Giorno(2ore), Stat.Zombie(mod)"MaxPlayers=30PingFrequency=10PingLimit=100HoursForLootRespawn=0MaxItemsForLootRespawn=4HoursForZombiesRespawn=0IncreaseZombieRespawnBy=0Thx!

Resolved! I downloaded from here http://ftp.redsleeve.org/pub/steam/ the following files: Then I wrote in the console: rpm -Uvh glibc-2.15-60.el6.i686.rpm \ glibc-2.15-60.el6.x86_64.rpm \ glibc-common-2.15-60.el6.x86_64.rpm \ glibc-devel-2.15-60.el6.x86_64.rpm \ glibc-headers-2.15-60.el6.x86_64.rpmAnd finally I launched the server:

Hello, also I am trying to host a server on centos 6.5 I'm following this guide: http://snipt.org/BfWa9 The various steps are: 1. wget http://ftp.gnu.org/gnu/glibc/glibc-2.14.tar.gz2. tar -xvzf glibc-2.14.tar.gz3. cd glibc-2.144. mkdir glibc-build5. cd glibc-build6. ../configure --prefix='/usr'7. make8. sudo make installI replaced it with the version 2.16 Got to the point 6, it gives me this error: [root@games glibc-build]# ../configure --prefix='/usr'checking build system type... x86_64-unknown-linux-gnuchecking host system type... x86_64-unknown-linux-gnuchecking for gcc... gccchecking for suffix of object files... ochecking whether we are using the GNU C compiler... yeschecking whether gcc accepts -g... yeschecking for gcc option to accept ISO C89... none neededchecking how to run the C preprocessor... gcc -Echecking for g++... g++checking whether we are using the GNU C++ compiler... yeschecking whether g++ accepts -g... yeschecking for sysdeps preconfigure fragments... x86_64 checking whether gcc compiles in -mx32 mode by default... noconfigure: running configure fragment for add-on libidnconfigure: running configure fragment for add-on nptlchecking for assembler gnu_indirect_function symbol type support... yeschecking whether .text pseudo-op must be used... yeschecking for assembler global-symbol directive... .globlchecking for assembler .type directive prefix... @checking sysdep dirs... sysdeps/unix/sysv/linux/x86_64/64/nptl sysdeps/unix/sysv/linux/x86_64/64 nptl/sysdeps/unix/sysv/linux/x86_64 nptl/sysdeps/unix/sysv/linux/x86 sysdeps/unix/sysv/linux/x86 sysdeps/unix/sysv/linux/x86_64 sysdeps/unix/sysv/linux/wordsize-64 nptl/sysdeps/unix/sysv/linux nptl/sysdeps/pthread sysdeps/pthread sysdeps/unix/sysv/linux sysdeps/gnu sysdeps/unix/inet nptl/sysdeps/unix/sysv sysdeps/unix/sysv sysdeps/unix/x86_64 nptl/sysdeps/unix sysdeps/unix sysdeps/posix nptl/sysdeps/x86_64/64 sysdeps/x86_64/64 sysdeps/x86_64/fpu/multiarch sysdeps/x86_64/fpu sysdeps/x86/fpu sysdeps/x86_64/multiarch nptl/sysdeps/x86_64 sysdeps/x86_64 sysdeps/x86 sysdeps/ieee754/ldbl-96 sysdeps/ieee754/dbl-64/wordsize-64 sysdeps/ieee754/dbl-64 sysdeps/ieee754/flt-32 sysdeps/wordsize-64 sysdeps/ieee754 sysdeps/genericchecking for a BSD-compatible install... /usr/bin/install -cchecking whether ln -s works... yeschecking whether as is GNU as... yeschecking whether ld is GNU ld... yeschecking for as... aschecking version of as... 2.20.51.0.2, okchecking for ld... ldchecking version of ld... 2.20.51.0.2, okchecking for gcc... gccchecking version of gcc... 4.4.7, okchecking for gnumake... nochecking for gmake... gmakechecking version of gmake... 3.81, okchecking for gnumsgfmt... nochecking for gmsgfmt... nochecking for msgfmt... msgfmtchecking version of msgfmt... 0.17, okchecking for makeinfo... nochecking for sed... sedchecking version of sed... 4.2.1, okchecking for readelf... readelfchecking for nm... nmchecking for autoconf... autoconfchecking whether autoconf works... yesconfigure: WARNING:*** These auxiliary programs are missing or incompatible versions: makeinfo*** some features will be disabled.*** Check the INSTALL file for required versions.checking LD_LIBRARY_PATH variable... contains current directoryconfigure: error:*** LD_LIBRARY_PATH shouldn't contain the current directory when*** building glibc. Please change the environment variable*** and run configure again.[root@games glibc-build]#How do I solve? Thank You.