Marco1 Posted March 15, 2014 Share Posted March 15, 2014 ! Link to comment Share on other sites More sharing options...
Pelaaja2 Posted March 15, 2014 Share Posted March 15, 2014 Looks nice, but I haven't used map editor, so I can't do anything. Link to comment Share on other sites More sharing options...
Japer Posted March 15, 2014 Share Posted March 15, 2014 Looks pretty darn good for a first try. Roofs can be a bit tricky, just play around with them and see what works.For a full list of room definitions, what spawns in what room and in what container have a look here;http://theindiestone.com/forums/index.php/topic/5461-full-list-of-current-room-definitions/page-2#entry76231Put a .tbx up and I can check it for you if you like grivcin 1 Link to comment Share on other sites More sharing options...
Marco1 Posted March 15, 2014 Author Share Posted March 15, 2014 ! Link to comment Share on other sites More sharing options...
Jela331 Posted March 15, 2014 Share Posted March 15, 2014 http://theindiestone.com/forums/index.php/topic/5075-mapping-guide-v02/Â You should read it and you'll understand most of the things needed for mapping. Link to comment Share on other sites More sharing options...
Marco1 Posted March 16, 2014 Author Share Posted March 16, 2014 ! Link to comment Share on other sites More sharing options...
Jinja Posted March 16, 2014 Share Posted March 16, 2014 Maybe I'm blind or something but I can't find your TBX to check it. But I will give you some tips on making roofs that I discovered when making the two buildings I have. First of all you need to add another floor. So if your building has two stories you need to add at least a third, which is where the roof goes. Which brings me to the next tip. As you've probably noticed on very large building the roof tends to... hit the top of the floor and become flat on top? In cases like that just add another floor and add a roof on top of the roof until it's tall enough. I'm guess those are the problems you are running into with the roofs, so I hope that helps. Link to comment Share on other sites More sharing options...
Marco1 Posted March 16, 2014 Author Share Posted March 16, 2014 ! Link to comment Share on other sites More sharing options...
Jinja Posted March 16, 2014 Share Posted March 16, 2014 Well. Good luck with that. Link to comment Share on other sites More sharing options...
Japer Posted March 16, 2014 Share Posted March 16, 2014 Marco I do my roofs much like that too, 1 slope on each side then just a flat top. It doesn't really make a difference unless you have a building overlooking it, but it really doesn't matter. You can send me the .tbx and I'll check it and finalize it for you to make sure everything is alright.I can use it in my map mod, and im sure Ringo could squeeze it in somewhere too (also others may use it for there maps) Link to comment Share on other sites More sharing options...
Marco1 Posted March 16, 2014 Author Share Posted March 16, 2014 ! Link to comment Share on other sites More sharing options...
Marco1 Posted March 16, 2014 Author Share Posted March 16, 2014 ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now