Sometimes the sliding door cannot be opened normally

[Big_Tail_Wolf_Suomi]

 

Two days ago, I used the map editor to make some beautiful houses, but i dont' know what happened, sometimes the sliding door cannot be opened normally

when I'm approaching during the test, I press E Key

I will find that the action has changed into the action of lifting the window rather than opening the door

But this is not the case with sliding doors in some houses

Sometimes there may be situations in a house where half of the doors can be opened but the other half cannot normally

How do I fix this?

Now my houses has almost no sliding door that can be opened normally, which is really a big blow to me...

I've tried many ways

Use tile to paste on the wall layer Or

use the place door button to place a sliding door on the wall (but it will be strange)

and then use the draw wall tool to select the none wall to delete the wall

Or use the Wall2 layer to draw sliding doors

But it hardly works. The problem remains the same

I'm pretty sure I know the difference between sliding doors and ordinary French windows

[Big_Tail_Wolf_Suomi]

Now I find that the sliding doors of one of my houses and those of those houses are set up in the same way and can work normally,

but the sliding doors of the other house still can not work normally

[Big_Tail_Wolf_Suomi]

But what puzzles me is that this house is a conjoined house, and there are almost identical houses next to it

but the sliding door of this house can not operate normally like the sliding door of the house next to it

[Big_Tail_Wolf_Suomi]

they are uniformly configured

And I'm sure I only added my two map mod

So this is very strange

In addition, during the previous test, sometimes the houses in riverside town were also affected by this, and the sliding door could not be opened normally